/******************************************************************************** USI TWI Slave driver. Created by Donald R. Blake donblake at worldnet.att.net --------------------------------------------------------------------------------- Created from Atmel source files for Application Note AVR312: Using the USI Module as an I2C slave. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. --------------------------------------------------------------------------------- Change Activity: Date Description ------ ------------- 16 Mar 2007 Created. 27 Mar 2007 Added support for ATtiny261, 461 and 861. 26 Apr 2007 Fixed ACK of slave address on a read. 11 Nov 2013 Added support for Attiny24/44/84/4313 - Leonardo Miliani ********************************************************************************/ /******************************************************************************** includes ********************************************************************************/ #include #include #include "usiTwiSlave.h" /******************************************************************************** device dependent defines ********************************************************************************/ #if defined( __AVR_ATtiny24__ ) | defined( __AVR_ATtiny44__ ) | defined( __AVR_ATtiny84__ ) #define DDR_USI DDRA #define PORT_USI PORTA #define PIN_USI PINA #define PORT_USI_SDA PA6 #define PORT_USI_SCL PA4 #define PIN_USI_SDA PINA6 #define PIN_USI_SCL PINA4 #define USI_START_COND_INT USISIF #define USI_START_VECTOR USI_START_vect #define USI_OVERFLOW_VECTOR USI_OVF_vect #endif #if defined( __AVR_ATtiny2313__ ) | defined(__AVR_ATtiny4313__) # define DDR_USI DDRB # define PORT_USI PORTB # define PIN_USI PINB # define PORT_USI_SDA PB5 # define PORT_USI_SCL PB7 # define PIN_USI_SDA PINB5 # define PIN_USI_SCL PINB7 # define USI_START_COND_INT USISIF # define USI_START_VECTOR USI_START_vect # define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect #endif #if defined( __AVR_ATtiny25__ ) | defined( __AVR_ATtiny45__ ) | defined( __AVR_ATtiny85__ ) # define DDR_USI DDRB # define PORT_USI PORTB # define PIN_USI PINB # define PORT_USI_SDA PB0 # define PORT_USI_SCL PB2 # define PIN_USI_SDA PINB0 # define PIN_USI_SCL PINB2 # define USI_START_COND_INT USISIF //was USICIF jjg # define USI_START_VECTOR USI_START_vect # define USI_OVERFLOW_VECTOR USI_OVF_vect #endif #if defined( __AVR_ATtiny26__ ) # define DDR_USI DDRB # define PORT_USI PORTB # define PIN_USI PINB # define PORT_USI_SDA PB0 # define PORT_USI_SCL PB2 # define PIN_USI_SDA PINB0 # define PIN_USI_SCL PINB2 # define USI_START_COND_INT USISIF # define USI_START_VECTOR USI_STRT_vect # define USI_OVERFLOW_VECTOR USI_OVF_vect #endif #if defined( __AVR_ATtiny261__ ) | defined( __AVR_ATtiny461__ ) | defined( __AVR_ATtiny861__ ) # define DDR_USI DDRB # define PORT_USI PORTB # define PIN_USI PINB # define PORT_USI_SDA PB0 # define PORT_USI_SCL PB2 # define PIN_USI_SDA PINB0 # define PIN_USI_SCL PINB2 # define USI_START_COND_INT USISIF # define USI_START_VECTOR USI_START_vect # define USI_OVERFLOW_VECTOR USI_OVF_vect #endif #if defined( __AVR_ATmega165__ ) | \ defined( __AVR_ATmega325__ ) | \ defined( __AVR_ATmega3250__ ) | \ defined( __AVR_ATmega645__ ) | \ defined( __AVR_ATmega6450__ ) | \ defined( __AVR_ATmega329__ ) | \ defined( __AVR_ATmega3290__ ) # define DDR_USI DDRE # define PORT_USI PORTE # define PIN_USI PINE # define PORT_USI_SDA PE5 # define PORT_USI_SCL PE4 # define PIN_USI_SDA PINE5 # define PIN_USI_SCL PINE4 # define USI_START_COND_INT USISIF # define USI_START_VECTOR USI_START_vect # define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect #endif #if defined( __AVR_ATmega169__ ) # define DDR_USI DDRE # define PORT_USI PORTE # define PIN_USI PINE # define PORT_USI_SDA PE5 # define PORT_USI_SCL PE4 # define PIN_USI_SDA PINE5 # define PIN_USI_SCL PINE4 # define USI_START_COND_INT USISIF # define USI_START_VECTOR USI_START_vect # define USI_OVERFLOW_VECTOR USI_OVERFLOW_vect #endif /******************************************************************************** functions implemented as macros ********************************************************************************/ #define SET_USI_TO_SEND_ACK( ) \ { \ /* prepare ACK */ \ USIDR = 0; \ /* set SDA as output */ \ DDR_USI |= ( 1 << PORT_USI_SDA ); \ /* clear all interrupt flags, except Start Cond */ \ USISR = \ ( 0 << USI_START_COND_INT ) | \ ( 1 << USIOIF ) | ( 1 << USIPF ) | \ ( 1 << USIDC )| \ /* set USI counter to shift 1 bit */ \ ( 0x0E << USICNT0 ); \ } #define SET_USI_TO_READ_ACK( ) \ { \ /* set SDA as input */ \ DDR_USI &= ~( 1 << PORT_USI_SDA ); \ /* prepare ACK */ \ USIDR = 0; \ /* clear all interrupt flags, except Start Cond */ \ USISR = \ ( 0 << USI_START_COND_INT ) | \ ( 1 << USIOIF ) | \ ( 1 << USIPF ) | \ ( 1 << USIDC ) | \ /* set USI counter to shift 1 bit */ \ ( 0x0E << USICNT0 ); \ } #define SET_USI_TO_TWI_START_CONDITION_MODE( ) \ { \ USICR = \ /* enable Start Condition Interrupt, disable Overflow Interrupt */ \ ( 1 << USISIE ) | ( 0 << USIOIE ) | \ /* set USI in Two-wire mode, no USI Counter overflow hold */ \ ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | \ /* Shift Register Clock Source = External, positive edge */ \ /* 4-Bit Counter Source = external, both edges */ \ ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | \ /* no toggle clock-port pin */ \ ( 0 << USITC ); \ USISR = \ /* clear all interrupt flags, except Start Cond */ \ ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | \ ( 1 << USIDC ) | ( 0x0 << USICNT0 ); \ } #define SET_USI_TO_SEND_DATA( ) \ { \ /* set SDA as output */ \ DDR_USI |= ( 1 << PORT_USI_SDA ); \ /* clear all interrupt flags, except Start Cond */ \ USISR = \ ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | \ ( 1 << USIDC) | \ /* set USI to shift out 8 bits */ \ ( 0x0 << USICNT0 ); \ } #define SET_USI_TO_READ_DATA( ) \ { \ /* set SDA as input */ \ DDR_USI &= ~( 1 << PORT_USI_SDA ); \ /* clear all interrupt flags, except Start Cond */ \ USISR = \ ( 0 << USI_START_COND_INT ) | ( 1 << USIOIF ) | \ ( 1 << USIPF ) | ( 1 << USIDC ) | \ /* set USI to shift out 8 bits */ \ ( 0x0 << USICNT0 ); \ } /******************************************************************************** typedef's ********************************************************************************/ typedef enum { USI_SLAVE_CHECK_ADDRESS = 0x00, USI_SLAVE_SEND_DATA = 0x01, USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA = 0x02, USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA = 0x03, USI_SLAVE_REQUEST_DATA = 0x04, USI_SLAVE_GET_DATA_AND_SEND_ACK = 0x05 } overflowState_t; /******************************************************************************** local variables ********************************************************************************/ static uint8_t slaveAddress; static volatile overflowState_t overflowState; static uint8_t rxBuf[ TWI_RX_BUFFER_SIZE ]; static volatile uint8_t rxHead; static volatile uint8_t rxTail; static uint8_t txBuf[ TWI_TX_BUFFER_SIZE ]; static volatile uint8_t txHead; static volatile uint8_t txTail; /******************************************************************************** local functions ********************************************************************************/ // flushes the TWI buffers static void flushTwiBuffers( void ) { rxTail = 0; rxHead = 0; txTail = 0; txHead = 0; } // end flushTwiBuffers /******************************************************************************** public functions ********************************************************************************/ // initialise USI for TWI slave mode void usiTwiSlaveInit( uint8_t ownAddress ) { flushTwiBuffers( ); slaveAddress = ownAddress; // In Two Wire mode (USIWM1, USIWM0 = 1X), the slave USI will pull SCL // low when a start condition is detected or a counter overflow (only // for USIWM1, USIWM0 = 11). This inserts a wait state. SCL is released // by the ISRs (USI_START_vect and USI_OVERFLOW_vect). // Set SCL and SDA as output DDR_USI |= ( 1 << PORT_USI_SCL ) | ( 1 << PORT_USI_SDA ); // set SCL high PORT_USI |= ( 1 << PORT_USI_SCL ); // set SDA high PORT_USI |= ( 1 << PORT_USI_SDA ); // Set SDA as input DDR_USI &= ~( 1 << PORT_USI_SDA ); USICR = // enable Start Condition Interrupt ( 1 << USISIE ) | // disable Overflow Interrupt ( 0 << USIOIE ) | // set USI in Two-wire mode, no USI Counter overflow hold ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | // Shift Register Clock Source = external, positive edge // 4-Bit Counter Source = external, both edges ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | // no toggle clock-port pin ( 0 << USITC ); // clear all interrupt flags and reset overflow counter USISR = ( 1 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) | ( 1 << USIDC ); } // end usiTwiSlaveInit // put data in the transmission buffer, wait if buffer is full void usiTwiTransmitByte( uint8_t data ) { uint8_t tmphead; // calculate buffer index tmphead = ( txHead + 1 ) & TWI_TX_BUFFER_MASK; // wait for free space in buffer while ( tmphead == txTail ); // store data in buffer txBuf[ tmphead ] = data; // store new index txHead = tmphead; } // end usiTwiTransmitByte // return a byte from the receive buffer, wait if buffer is empty uint8_t usiTwiReceiveByte( void ) { // wait for Rx data while ( rxHead == rxTail ); // calculate buffer index rxTail = ( rxTail + 1 ) & TWI_RX_BUFFER_MASK; // return data from the buffer. return rxBuf[ rxTail ]; } // end usiTwiReceiveByte // check if there is data in the receive buffer bool usiTwiDataInReceiveBuffer( void ) { // return 0 (false) if the receive buffer is empty return rxHead != rxTail; } // end usiTwiDataInReceiveBuffer /******************************************************************************** USI Start Condition ISR ********************************************************************************/ ISR( USI_START_VECTOR ) { // set default starting conditions for new TWI package overflowState = USI_SLAVE_CHECK_ADDRESS; // set SDA as input DDR_USI &= ~( 1 << PORT_USI_SDA ); // wait for SCL to go low to ensure the Start Condition has completed (the // start detector will hold SCL low ) - if a Stop Condition arises then leave // the interrupt to prevent waiting forever - don't use USISR to test for Stop // Condition as in Application Note AVR312 because the Stop Condition Flag is // going to be set from the last TWI sequence while ( // SCL his high ( PIN_USI & ( 1 << PIN_USI_SCL ) ) && // and SDA is low !( ( PIN_USI & ( 1 << PIN_USI_SDA ) ) ) ); if ( !( PIN_USI & ( 1 << PIN_USI_SDA ) ) ) { // a Stop Condition did not occur USICR = // keep Start Condition Interrupt enabled to detect RESTART ( 1 << USISIE ) | // enable Overflow Interrupt ( 1 << USIOIE ) | // set USI in Two-wire mode, hold SCL low on USI Counter overflow ( 1 << USIWM1 ) | ( 1 << USIWM0 ) | // Shift Register Clock Source = External, positive edge // 4-Bit Counter Source = external, both edges ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | // no toggle clock-port pin ( 0 << USITC ); } else { // a Stop Condition did occur USICR = // enable Start Condition Interrupt ( 1 << USISIE ) | // disable Overflow Interrupt ( 0 << USIOIE ) | // set USI in Two-wire mode, no USI Counter overflow hold ( 1 << USIWM1 ) | ( 0 << USIWM0 ) | // Shift Register Clock Source = external, positive edge // 4-Bit Counter Source = external, both edges ( 1 << USICS1 ) | ( 0 << USICS0 ) | ( 0 << USICLK ) | // no toggle clock-port pin ( 0 << USITC ); } // end if USISR = // clear interrupt flags - resetting the Start Condition Flag will // release SCL ( 1 << USI_START_COND_INT ) | ( 1 << USIOIF ) | ( 1 << USIPF ) |( 1 << USIDC ) | // set USI to sample 8 bits (count 16 external SCL pin toggles) ( 0x0 << USICNT0); } // end ISR( USI_START_VECTOR ) /******************************************************************************** USI Overflow ISR Handles all the communication. Only disabled when waiting for a new Start Condition. ********************************************************************************/ ISR( USI_OVERFLOW_VECTOR ) { switch ( overflowState ) { // Address mode: check address and send ACK (and next USI_SLAVE_SEND_DATA) if OK, // else reset USI case USI_SLAVE_CHECK_ADDRESS: if ( ( USIDR == 0 ) || ( ( USIDR >> 1 ) == slaveAddress) ) { if ( USIDR & 0x01 ) { overflowState = USI_SLAVE_SEND_DATA; } else { overflowState = USI_SLAVE_REQUEST_DATA; } // end if SET_USI_TO_SEND_ACK( ); } else { SET_USI_TO_TWI_START_CONDITION_MODE( ); } break; // Master write data mode: check reply and goto USI_SLAVE_SEND_DATA if OK, // else reset USI case USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA: if ( USIDR ) { // if NACK, the master does not want more data SET_USI_TO_TWI_START_CONDITION_MODE( ); return; } // from here we just drop straight into USI_SLAVE_SEND_DATA if the // master sent an ACK // copy data from buffer to USIDR and set USI to shift byte // next USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA case USI_SLAVE_SEND_DATA: // Get data from Buffer if ( txHead != txTail ) { txTail = ( txTail + 1 ) & TWI_TX_BUFFER_MASK; USIDR = txBuf[ txTail ]; } else { // the buffer is empty SET_USI_TO_TWI_START_CONDITION_MODE( ); return; } // end if overflowState = USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA; SET_USI_TO_SEND_DATA( ); break; // set USI to sample reply from master // next USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA case USI_SLAVE_REQUEST_REPLY_FROM_SEND_DATA: overflowState = USI_SLAVE_CHECK_REPLY_FROM_SEND_DATA; SET_USI_TO_READ_ACK( ); break; // Master read data mode: set USI to sample data from master, next // USI_SLAVE_GET_DATA_AND_SEND_ACK case USI_SLAVE_REQUEST_DATA: overflowState = USI_SLAVE_GET_DATA_AND_SEND_ACK; SET_USI_TO_READ_DATA( ); break; // copy data from USIDR and send ACK // next USI_SLAVE_REQUEST_DATA case USI_SLAVE_GET_DATA_AND_SEND_ACK: // put data into buffer // Not necessary, but prevents warnings rxHead = ( rxHead + 1 ) & TWI_RX_BUFFER_MASK; rxBuf[ rxHead ] = USIDR; // next USI_SLAVE_REQUEST_DATA overflowState = USI_SLAVE_REQUEST_DATA; SET_USI_TO_SEND_ACK( ); break; } // end switch } // end ISR( USI_OVERFLOW_VECTOR )